Wenesco Hand-Held & Custom Built Stationary Plates
Please email firstname.lastname@example.org directly for any inquiries regarding purchasing Wenesco Hand-Held & Custom Built Stationary Plates.
These hand-held hot plates, with dual heated surfaces, are designed for fusing plastic pipe, sheets and other plastic materials.
All models are surfaced with an abrasive-resistant Teflon coating.
Temperature is controlled with a dial-type thermostat. A 4-ft line cord and insulated handle are standard.
(Above) Model HAN1202
(Left) Model HAN66
A remote digital thermostat is optional at extra cost. We make these hot plates in special sizes and shapes.
(Above/Right) Model HAN 2402 double-sided, Teflon-coated hot plate for butt-fusion welding of polyethylene sheets. This 24 x 1.5 in. plate is controlled with an accurate, remote digital thermostat, with an adjustable range of 70-400F, with heat evenly distributed across all surfaces of the plate. Supported at both ends with insulated handles, it may be mounted to a work table as shown.
(Above) Fusion Hot Plate for PVC pipe and sockets consists of two vertical heated plates with 36-inch diameter heat rings. The rings, mounted on heated plates, are interchangeable. Each Teflon-coated aluminum plate is individually controlled with an accurate digital thermostat. This system operates at 400F and requires 25,000 watts at 240V, 3- phase.
(Above) Model BF1212 aluminum hot plate has dual 12x12" heated surfaces. The surfaces are furnished plain or Teflon coated. Temperature is controlled with a remote digital thermostat. This model operates at 3600W, 240Vsingle phase
(Above) Butt Fusion Hot Plate, 144 x 5 inches. The plate is controlled with an accurate remote digital thermostat. Surface uniformity is held to 2% of set point.
(Above) Heated Clamp shown with remote digital thermostat. May be powered with air cylinders to clamp heated Teflon surfaces around any rope-like circular object for bonding or sealing.
Return to directory of all industrial hot plates by clicking HERE