Wenesco Static Solder Pots
Models MPM 59H, MPM16, MPM 225, MPM 32
Wenesco Static Solder Pots provide a reliable solution for low-volume PCB soldering, electronics assembly, and precision dip soldering applications.
Models MPM 59H, MPM16, MPM 225, and MPM 32 feature ceramic-coated solder pots designed for operation with both standard and lead-free alloys, supporting consistent thermal performance and extended equipment life in demanding production environments.
These solder pots use a simple and proven soldering process that remains widely used across electronics manufacturing and repair operations. After applying flux and removing surface dross, operators can dip the circuit board directly into the molten solder using a board gripper, completing the soldering process in less than five seconds.
Thermostat-controlled operation up to 575°F allows precise temperature management for repeatable soldering quality and process consistency.
Wenesco welcomes your inquiry regarding other sizes and shapes.
| Model | Inside Size (in inches) | Solder Capacity |
|---|---|---|
| MPM 16 | 5.75 X 5.25 X 2 | 16 lb |
| MPM 25 | 5.3 X 9.3 X 2.5 | 25 lb |
| MPM 32 | 11.75 X 5.37 X 2.5 | 32 lb |
| MPM 59H | 14 X 14 X 1.75 | 59 lb |
| MPM 225 | 18 X 20 X 3 | 225 lb |
- All models feature thermostat-controlled operation with a numbered 1–10 control dial for consistent temperature adjustment.
- Operating temperatures range from 450°F to 950°F, depending on the model configuration and thermostat type, with accuracy of approximately ±25°F.
- Optional power controls are available to reduce the operating temperature range to 0–575°F for lower-temperature applications.
- Optional digital thermostats provide precise temperature control, digital temperature display, and expanded operating capability up to 950°F.
Models MPM1700D, MPM1325D
Wenesco Models MPM1700D and MPM1325D are heavy-duty solder pots designed for roofing and industrial metal fabrication applications that require reliable high-temperature soldering performance.
Built for continuous operation, these units provide consistent heat control for soldering sheet metal, gutters, flashing, copper roofing components, and architectural metal assemblies in demanding job site environments.
These roofing solder pots feature durable construction and thermostat-controlled operation to maintain stable solder temperatures throughout extended use.
Their high-capacity design supports efficient workflow for roofing contractors and metalworking professionals who require dependable thermal performance, process consistency, and long-term equipment durability in field and shop applications.
Wenesco welcomes your inquiry regarding other sizes and shapes.
Frequently Asked Questions
What are Wenesco Static Solder Pots used for?
Wenesco Static Solder Pots are used for low-volume PCB soldering, electronics assembly, dip soldering, prototype manufacturing, and industrial repair applications that require controlled molten solder temperatures.
Are Wenesco Static Solder Pots compatible with lead-free solder?
Yes. All Wenesco solder pots are ceramic coated for operation with both standard and lead-free solder alloys, supporting modern electronics manufacturing requirements.
How quickly can circuit boards be soldered in a static solder pot?
When properly prepared with flux and clean solder surfaces, circuit boards can typically be soldered in less than five seconds using the dip soldering process.
What temperature control options are available for Wenesco Static Solder Pots?
Wenesco Static Solder Pots are available with thermostat controls, optional power controls for lower operating ranges, and digital thermostats for enhanced temperature accuracy and display capability.
Can Wenesco solder pots be used for roofing and sheet metal applications?
Yes. Wenesco also manufactures solder pots designed for roofing, flashing, gutter fabrication, and sheet metal soldering applications that require reliable high-temperature performance and continuous operation.