Wenesco Solder Feeder

Microptik BV is our distributor serving Europe, the Middle East, Africa, and Asia. Visit their site: www.wenesco.eu

© 2018 Designed by Adam Victorn - Wenesco - Entire site copyright 1998-2019 by LDS Industries, LLC. All rights reserved.

Wenesco Solder Feeder

Here's a Wenesco system that helps automate soldering procedures by feeding solder wire to your application or solder pot. 

(Above) Model M21 is designed to feed a wide range of wire sizes at a controlled speed using hardened drive rolls.  This equipment may be used with a suitable level sensor to make up solder in your solder pot.

(Above) Model M21 is designed to feed a wide range of wire sizes at a controlled speed using hardened drive rolls.  This equipment may be used with a suitable level sensor to make up solder in your solder pot.

(Right) Model M14 Wave Solder Pot shown with 10"x3" wave nozzle and a solder level switch that controls an automatic solder feeder. This equipment will be used in an automatic machine for soldering connectors.

(Above) Model M21 may be remotely placed using 36-in. nylon tubing and customized brass tip to feed the solder to its destination.

(Above) Model M21 may be remotely placed using 36-in. nylon tubing and customized brass tip to feed the solder to its destination.

(Below) Solder Level Switch may be purchased separately.

Return to directory of all Wave Solder Pots by clicking HERE